Controller CRU Removal


Controller CRU Removal

 

NOTE: Keep track of which controller CRU belongs in each slot.
To prevent data loss, you must replace each controller (A or B) in their original slot.

Removing a Controller CRU:
  1.  Unlock the levers of the controller you want to remove.
  2.  Open both levers at the same time.
  3.  Pull out the controller.


Installing a Controller CRU:
  1.  Make sure both levers are straight out as shown above.
  2.  Carefully push the Controller CRU into the slot making sure both levers swing inward at the same time.
  3.  Close and lock both levers at the same time.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.