Specifications
The Netfinity Fibre Channel PCI Adapter operating environment and specification information are as follows:
Environment Minimum Maximum
----------------------------------------------------
Operating 0°C (32°F) 55°C (131°F)
temperature
Storage -20°C (-4°F) 70°C (158°F)
temperature
Relative humidity 10% 90%
(noncondensing)
Storage humidity 5% 95%
(noncondensing)
Type
Specification
Host bus
Conforms to PCI Local Bus Specification, revision 2.1
PCI signaling environment
3.3 V and 5.0 V buses supported
PCI transfer rate
264 MB per second maximum burst rate for 33 MHz operation
(ISP2100 chip)
Fibre Channel specifications
Bus type: fibre optic media (QLA2100F)
Bus transfer rate: 100 MB per second maximum
Central processing unit (CPU)
Single chip design that includes a RISC processor, Fibre Channel
protocol manager, PCI DMA controller, and 1-gigabit transceivers
Host data transfer
64-bit, bus master DMA data transfers to 264 MB per second
RAM
128KB of SRAM
BIOS ROM
128KB of flash ROM in two 64KB, software selectable banks.
The flash is field programmable.
NVRAM
256 bytes, field programmable
Onboard DMA
Three independent DMA channels: two data and one command.
Integrated 4KB frame buffer FIFO for each data channel
Connectors (external)
SC-style connector that supports non-OFC, multimode fibre optic
cabling using 1 x 9 fibre optic transceiver module.
Total cable length cannot exceed 500 meters.
Form factor
17.78 cm x 10.67 cm (7.0 in. x 4.2 in.)
Operating power
Less than 15 watts
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.