Removing the GBIC

Removing the GBIC

To remove a GBIC that does not have a metal latch from the hub port:

1.  Press the opposing tabs on the GBIC toward each other while slowly removing  the module from the hub (with the fiber optic cables still installed).
2.  Remove the cable assembly from the GBIC.

To remove a GBIC that has a metal latch from the hub port: (Refer to the artwork shown in Installing the GBIC.)

1.  Remove the fiber optic cable assembly from the GBIC.
2.  Move the latch to the unlocked (center) position.
3.  Press the opposing tabs on the GBIC toward each other while slowly removing it from the port.