Monitoring the Logical Drive Information
You can monitor the logical drive information by clicking on the desired logical drive button on the Main screen of the Administration and Monitoring Program.
Descriptions of the information that appears on the Logical Drive Information screen are as follows:
Logical Drive Number
The number of the logical drive.
No - The logical drive is accessible.
Yes - The logical drive is not accessible.
Part of Array
The identifier of the logical drive disk array (A, B, C, D, E, F, G, H).
Part of Merge Group
The identifier of the logical drive merge group (1 through 254).
The date the logical drive was created.
The current state (see 'Logical Drive State Descriptions'
for more information).
The size in megabytes.
RAID level (0, 1, or 5).
WT - Write-through.
WB - Write-back.
NVRAM Battery Backup
Enable - The battery-backup cache is On.
Disable - The battery-backup cache is Off.
Off - Disk Read-Ahead is inactive.
On - Disk Read-Ahead is active.
The size of each stripe unit per hard disk (8, 16, 32, 64).
Number of Chunks
The number of hard disk drives that make up the logical drive.
The channel and SCSI ID of the physical drives that make up the
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.