IPSSEND.EXE for IBM ServeRAID and ServeRAID II Adapters

IPSSEND.EXE for IBM ServeRAID and ServeRAID II Adapters

Instructions for Using the IPSSEND utility 

The IBM ServeRAID and ServeRAID II Adapters provide the IPSSFND utility as a means for Data Scrubbing under all supported operating systems. The IPSSEND utility is available on the IBM ServeRAID Supplemental Diskette at http://www.us.pc.ibm.com/files.html . Search on 'ServeRAID.' The IPSSEND utility may be coupled with a third party event scheduler such as REXXWARF by Simware Corporation at http://www.simware.com or AT Scheduler built into Windows NT. Syntax of IPSSEND is described below.

1.  At a command prompt, type the following:

    'ipssend synch <adapter #> drive <logical drive #>'

    where the adapter number starts at I and logical drive number starts at 0. The IBM  ServeRAID Administration and Monitoring Utility will display the logical drive  numbers and their corresponding adapter numbers.