Exchanging DRAMs on the SSA RAID Cluster Adapter

Exchanging DRAMs on the SSA RAID Cluster Adapter

Removing a DRAM

1.  Shut down the operating system.
2.  Remove power from the system.
3.  Remove the adapter from the system unit.
4.  Release the clips -1- by carefully pulling them past  the ends of the DRAM -2-
5.  Rotate the DRAM away from the adapter card.
6.  Pull the DRAM out from the socket.

1.  Insert the DRAM into the keyed socket.
2.  Press the DRAM into the socket, then rotate the DRAM until the clips  -1- click into place.
3.  Reinstall the adapter into the system unit (see the service information for the  system unit).
4.  Turn on the power to the system.
5.  Start up the system.