The Port Configuration Group
Use the Modem Settings group to specify and configure the modem
that will be used to forward the alert when a Service Processor
Dialout Event occurs. The Port Configuration group contains the
following items.
Item
Description
Port to configure
Port to configure Use the spin buttons to select the number of the port
that your modem is configured to use. This spin
button will show only values that are available for use
by your Advanced Systems Management Adapter.
Baud rate Use the spin buttons to specify the the baud rate of
the modem.
Initialization
Type the initialization string that will be used for the
string
specified modem. A default string is provided (ATE0).
Do not change this string unless your dialout functions
are not working properly. If you need to change the
initialization string, see 'Initialization String Guidelines'.
Caller ID string
This field is not used.
Port selected
This check box indicates whether the port number
currently displayed in the Port to configure field is
the port that is currently designated for use by the
Advanced Systems Management Adapter. Check this
check box if you want to configure the Service
Processor to use the currently displayed port number.
Null modem
Null modem Check this check box to use a null modem connection
to allow access from a remote Netfinity system.
Note: If the Null Modem checkbox is checked you
cannot send dialout alerts to other systems
using a modem or receive dialout alerts from
other systems.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.