SCSI Messages (Type 8644)
Message
Description
Valid for -All- SCSI messages
1. Verify SCSI Configuration
One or more of the following
2. SCSI Device
might be causing the problem:
3. SCSI Controller
° A failing SCSI device (adapter,
drive, controller)
° An improper SCSI configuration
or SCSI termination jumper
setting
° Duplicate SCSI IDs in the same
SCSI chain
° A missing or improperly installed
SCSI terminator
° A defective SCSI terminator
° An improperly installed cable
° A defective cable
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.