Performing a Shutdown (Netfinity EXP10 - 3520)

Performing a Shutdown

NOTE: If the Expansion Unit loses power unexpectedly, it might be be due to a hardware failure in the power system or mid-plane (see 'Symptom-to-FRU Index').

To perform a shutdown:

1.  If possible, stop all activity and check the LEDs (front  and back). Make note ot any fault LEDs that may be  lit so you can correct the problem when you turn on the power again.
2.  Turn off both  power supply switches, then, unplug  both power cords trom the Expansion Unit.