| Beep Code | FRU/Action. |
|---|---|
| 1 Beep | 1. Check memory in J2,J3,J4,J5 |
| (Refresh failure) | 2. Memory DIMMs |
| 3. Memory Board | |
| 2 Beeps | 1. Check memory |
| (Parity can't be reset) | 2. Memory DIMMs |
| 3. Memory Board | |
| 3 Beeps | 1. Check memory |
| (First 64KB memory failure) | 2. Memory DIMMs |
| 3. Memory Board | |
| 4. Processor Board | |
| 5. System Board | |
| 4 Beeps | 1. Check processor board |
| (Timer not operational) | 2. Check System Board |
| 3. System Board | |
| 5 Beeps | 1. Reseat processor module |
| (Processor failure) | 2. Processor Board |
| 3. System Board | |
| 6 Beeps | 1. Reseat processor module |
| (8042 gate a20 is off v_mode) | 2. System Board |
| 3. Processor Board | |
| 7 Beeps | 1. Check cables |
| (Exception interrupt error) | 2. Processor Board |
| 3. System Board | |
| 8 Beeps | 1. Check/Install Video RAM |
| (Display memory read/write error | 2. System Board |
| 9 Beeps | 1. Update BIOS |
| (ROM checksum error) | 2. System Board |
| 10 Beeps | 1. System Board |
| (Shutdown register | |
| read/write error) | |
| 11 Beeps | 1. Reseat Processor and Memory Module |
| (I2C Error). | 2. Check cabling for Information |
| Panel and Advanced Server | |
| 3. Advanced Server Mgmt. Adapter | |
| 4. Front Panel | |
| 5. System Board |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.