System-Board Configuration Switch Settings
Some configuration actions are controlled
through switches on the system board. Table 9
summarizes the switch settings that correspond to these
actions.
Table 9. Configuration Switch Settings
Switch
Position
Function
S6A1-1
On
Resets NVRAM and the
Real-Time Clock (RTC) to the
factory defaults on system
startup.
S6A1-1
Off (1)
Retains current CMOS settings
on system startup.
S6A1-2
On
Clears the user and
administrative passwords on
system Startup.
S6A1-2
Off (1)
Passwords can be entered or
changed.
S6A1-3
Off (1)
Reserved
NOTE: 1 This is the factory default.
2 Do not change the settings for switches S6A1-4, S6A1-5,
S6A1-6, or S6A1-8. These switch settings should remain as set at the factory.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.