| Pins | Description |
|---|---|
| 1-2 | Reserved. |
| 3-4 | Placing a jumper on these two pins disables SCSI terminator for optional SCSI repeater card. |
| 5-6 | Placing a jumper on these two pins enables SCSI IDa 8-D |
| 7-8 | Reserved. |
| 9-10 | Reserved. |
| 11-12 | Placing a jumper on these two pins reverses the SCSI IDs on the backplane. |
NOTE: The default is no jumpers installed on the J1O jumper block.
SCSI IDs that you can use for hot-swap drives.
J10 Pins 5-6
J10 Pins 11-12
Bay-1
Bay-2
Bay-3
Bay-4
Bay-5
Bay-6
No jumper (1)
No jumper (1)
0
1
2
3
4
5
No jumper
Jumper
5
4
3
2
1
0
Jumper
No jumper (2)
13
12
11
10
9
8
Jumper (2)
Jumper (2)
-
-
-
-
-
-
NOTE:
1 This is the default jumper setting.
2 This combination is not supported.
See > SCSI Repeater card installation.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.