SCSI Messages (Netfinity 7000 - 8651)

SCSI Messages

NOTE: If the server has a CD-ROM drive, but does not have a hard disk drive, ignore any message that indicates that the BIOS is not installed.

SCSI Messages

Description

All

One or more of the following might be causing the problem. ° A failing SCSI device (adapter, drive, controller) ° An improper SCSI configuration ° Duplicate SCSI IDs in the same SCSI chain ° An improperly installed SCSI terminator ° A defective SCSI terminator ° An improperly installed cable ° A defective cable Action: Verify that: ° The external SCSI devices are turned on. External SCSI devices must be turned on before the system. ° The cables for all external SCSI devices are connected correctly. ° The last device in each SCSI chain is terminated correctly. (See 'SCSI Drives' for more SCSI chain information.) ° The SCSI devices are configured correctly. If the above are correct, run the diagnostics for additional information about the failing device.