Resolving Hardware Configuration Conflicts

1.  Run the Setup program to view and change resources used by the  system board functions and the PCI interrupt requests (IRQs), if  necessary. Record the current settings before making  any changes. (See 'Starting the Configuration/Setup Utility' for instructions.)
2.  Determine which adapter or device is causing the error.
3.  Change configuration resource allocations. Use the Configuration/Setup utility program to  view or change system board resource allocations. Jumpers and switches define the system resources  a device uses. If the settings are incorrect or set to use a resource that cannot be shared, a conflict occurs and the  device will remain deactivated by the configuration program.
4.  Change system board jumpers or switches.
5.  Remove the device or adapter. Some configurations are not  supported.