Resolving Configuration Conflicts (Server 330 - x1Y, Pxx)
Resolving Configuration Conflicts
The resources used by the server consist of IRQs, DMA, I/O ports
addresses, and memory. This information is useful when a resource
configuration conflict occurs.
Conflicts in the configuration occur if:
- A device is installed that requires the same resource as another
device. (For example, a conflict occurs when two adapters try to write to
the same address space.)
- A device resource is changed (for example, changing jumper settings).
- A device function is changed (for example, assigning COM1 to
two serial ports).
- A software program is installed that requires the same resource
as a hardware device.
The steps required to resolve a configuration error are determined by
the number and variety of hardware devices and software programs installed.
If a hardware configuration error is detected, a configuration
error message appears after the server completes POST and before the
operating system is loaded. You can bypass the error by pressing
Esc while the error message is displayed.
The Configuration/Setup utility program configures the system hardware
and PCI interrupt requests. The program does not consider the requirements
of the operating system or the application programs. See Resolving Software Configuration Conflicts
for additional information.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.