Resolving Hardware Configuration Conflicts

1.  Run the Configuration/Setup program to view the settings  Record the current settings before making  any changes. (See 'Starting the Configuration/Setup Utility Program')
2.  Determine which adapter or device is causing the error.
3.  Change configuration resource allocations. Use the built-in Setup  program to view or change system board resource allocations. Use the Config/Setup utility program to view or change system board resource allocations.
4.  Change adapter jumpers or switches. Jumpers and switches define the  system resources that a device can use. If the settings are incorrect or  set to use a resource that cannot be shared, a conflict occurs and the  device remains deactivated by the configuration program.
5.  Remove the device or adapter. Some configurations are not supported (for example, you cannot operate the server with  two PCI SVGA adapters installed).