Start Options



Start Options

Start opptions take effect when you start the server.

Select Start Options, then, use the Up Arrow (  ) or Down Arrow (  ) key to highlight the assignment that you want to change. Use the Left Arrow (<) or Right arrow (>) key to select from the list of available choices.

You can select keyboard operating characteristics, such as the keyboard speed. You can also specify whether the keyboard number lock (NumLock) starts on or off.

The server uses a startup sequence to determine the diskette drive, hard disk drive, or network adapter from which the operating system loads. You can specify up to four devices in the Startup data fields. For example, you can define a startup sequence that checks for a startable diskette in the primary diskette drive, then checks the bays for a hard disk drive.

Select Startup on the Start Options menu, then, press Enter Follow the menu to set the startup sequence.

You can enable the server to run without checking for the presence or state of a monitor, keyboard, or diskette drive. The devices are disabled after the POST completes and the operating system has loaded. This allows you to enter a password and update the Configuration/Setup utility program in keyboardless operation.

You can select a test that the server runs at startup. For example, you can select to run a virus detection test. You can also choose whether to run POST in enhanced or quick mode.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.