| CP Code | Routine | Boot Mode |
|---|---|---|
| 01 | Test CPU Regs | Cold |
| 02 | Wait for RTC | Cold |
| 04 | Init Timer 0 | Cold+Warm+SAD |
| 05 | Test DMA | Cold+Warm+SAD |
| 06 | Test Page Regs | Cold+Warm+SAD |
| 07 | Verify Refresh | Cold |
| 08 | Enable Parity | Cold+Warm+SAD |
| 09 | Clear first 64 K | Cold+Warm |
| 0A | POST with Stack | Cold+Warm+SAD |
| 0B | BIOS Shadow | Cold+Warm |
| 0C | Phase 2 POST | Cold+Warm+SAD |
| 0D | Init KBD Data | Cold+Warm+SAD |
| 10 | Test DMS Locations | Cold+Warm+SAD |
| 12 | Test PICs | Cold+Warm+SAD |
| 14 | Init Vector Table | Cold+Warm+SAD |
| 15 | Init Keyboard | Cold+Warm+SAD |
| 16 | Std CMOS Checksum_NS | Cold+Warm |
| 17 | Check Configuration | Cold+Warm |
| 20 | Test Timer Tick | Cold |
| 21 | Test Timer 2 | Cold+Warm+SAD |
| 23 | Test RTC | Cold+Warm+SAD+SR |
| 26 | vpd_main | Cold+Warm |
| 30 | Shadow VPD | Cold+Warm |
| 31 | Save ID | Cold+Warm+SAD |
| 32 | Check P54C | Cold |
| 33 | Init Q Boot | Cold+Warm |
| 34 | Periph Config | Cold+Warm+SAD |
| 35 | Init Timeout Tables | Cold+Warm+SAD |
| 36 | Pos_Setup | Cold+Warm |
| 37 | TCPC | Cold+Warm |
| 38 | Find Serial Ports | Cold+Warm |
| 39 | Find Parallel Ports | Cold+Warm |
| 3A | Enable Timer Init | Cold+Warm+SAD |
| 3B | Clear Mem Size Error | Cold |
| 3C | Mfg Boot Fork | Cold |
| 3D | SignOn | Cold+Warm |
| 3E | CPU Name | Cold+Warm |
| 3F | CPU Speed | Cold+Warm |
| 40 | Enable Video | SAD |
| 41 | Size Memory Above 64 K | Cold+Warm |
| 42 | Password Not Entered | Cold |
| 43 | Test PS2 Mouse | Cold+Warm |
| 44 | Check for Mouse Buttons | Cold |
| 45 | Init KBD Flags | Cold+Warm+SAD |
| 46 | Test KBD | Cold+Warm |
| 47 | TCPC_Error | Cold+Warm |
| 48 | Mem Test Prompt | Cold+Warm |
| 49 | Test Memory | Cold+SR |
| 4A | Clear EBDA | Warm |
| 4B | Allocate EBDA | Cold+Warm+SR |
| 4C | xfer_EBDA_vars | Cold+Warm+SR |
| 4D | Set Warm Boot Flag | Warm |
| 4E | Clear Speed Bits | Cold+Warm+SAD |
| 4F | E_FLOB | Cold+Warm+SAD+SR |
| 50 | Enable System Interrupts | Cold+Warm+SAD+SR |
| 51 | C2Sec_Chk | Cold |
| 52 | Init KBD | Cold+Warm+SAD+SR |
| 53 | Check for NPX | Cold+Warm+SAD+SR |
| 54 | reset_hdctl | Cold+Warm+SAD+SR |
| 55 | FD_INIT | Cold+Warm+SAD+SR |
| 56 | Set Floppy Config | Cold+Warm+SAD+SR |
| 57 | Unlock Early | Cold |
| 58 | Init A20 | Cold+Warm+SAD+SR |
| 59 | HD Setup | Cold+Warm+SAD+SR |
| 5A | PnP_Assign Card Select Numbers | Cold+Warm+SR |
| 5B | Verify CMOS Config | Cold+Warm+SR |
| 5C | Clear Screen | Cold+Warm+SAD |
| 5D | PnP_Assign Resources | Cold+Warm+SR |
| 5E | Init Time of Day | Cold+Warm+SAD+SR |
| 5F | Check for Locked KBD | Cold+Warm+SAD+SR |
| 60 | Init Enable NMI | Cold+Warm+SAD+SR |
| 61 | Set Boot Speed | Cold+Warm+SR |
| 62 | Set KBD LEDs | Cold+Warm+SAD |
| 63 | Check for Setup Hot Key | Cold+Warm |
| 64 | CSET_AFT_MTEST | Cold+Warm |
| 65 | CSET_AFT_CMCFG | Cold+Warm+SR |
| 66 | CSET_BFR_OPROM | Cold+Warm+SR |
| 67 | Phase 2 Exit Big Real | Cold+Warm+SAD+SR |
| 90 | Disable Video | Cold+Warm+SAD |
| 91 | Phase 1 Enter Big Real | Cold+Warm+SAD |
| 93 | Init Refresh | Cold+Warm |
| 94 | Init Chip_NS | Cold+Warm+SAD |
| 95 | CSET_Init | Cold+Warm+SAD |
| 96 | Disable Parity | Cold+Warm+SAD |
| 97 | Periph Init | Cold+Warm+SAD |
| 98 | Init RTC | Cold+Warm+SAD |
| 99 | Init Timer 2 | Cold+Warm+SAD |
| 9A | Setup GPIO Addr | Cold+Warm+SAD |
| 9B | Post LED On_NS | Cold+Warm+SAD |
| 9C | CPU1 LED On_NS | Cold+Warm+SAD |
| B0 | Disable Appl 1 Local APIC | Cold+Warm |
| B3 | Display SMP Sign On | Cold+Warm |
| B4 | AP Cache Init | Cold+Warm |
| D1 | Cache Init | Cold+Warm+SAD |
| D3 | Cache Configure | Cold+Warm+SAD+SR |
| DA | EISA_Hook 6 | Cold+Warm+SAD |
| DB | EISA Configure | Cold+Warm+SAD |
| DC | EISA Errors | Cold+Warm |
| E0 | Reclaim Onboard Option ROM Space | Cold+Warm+SAD+SR |
| EA | PCI Reset | Cold+Warm |
| EB | PCI Video | Cold+Warm |
| EC | PCI Configure | Cold+Warm+SR |
| ED | PCI IDE | Cold+Warm |
| EE | PCI SCSI | Cold+Warm |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.