Configure/View Host Adapter Settings (Server 315, 330)

Configure/View Host Adapter Settings

To view or change the SCSI controller settings, select Configure/View Host Adapter Settings and follow the directions on the screen. This menu has the following selections:

Host Adapter SCSI ID
Select this choice to change the SCSI ID of the SCSI controller from its default value of 7.
SCSI Parity Checking
The default value is Enabled . This value should not be changed.
Host Adapter SCSI Termination
Select this choice to configure SCSI controller termination. The default value is Low On/High On .
SCSI Device Configuration
Select this choice to configure SCSI device parameters. Before you can make updates, you must know the ID of the device whose parameters you want to configure.
Advanced Configuration Options
Select this choice to view or change the settings for advanced configuration options. These options include enabling support large hard disk drives and support for multiple drives with Ultra SCSI speed (for DOS V-5.0 or higher).

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.