Peripheral Device Related Symptoms (WP z50 - 2608)

Peripheral Device Related Symptoms
Symptom/Error    FRU/Action in Sequence
   The external monitor does 1. Check that the external monitor is enabled in the
   not work correctly.     Rapid Access utility.
  2. Check that the external monitor can display at
      640x480 and 800x600, and 75Hz refresh rate.
  3. Connect the external monitor to another PC.
      If the monitor works fine, replace the mainboard.
      If not, replace the external monitor.
   Serial port device problems. 1. Run serial port wrap test
  2. Device
  3. Mainboard
  4. Device cable
     Note: The serial port and the infrared port
     can not be used at the same time.

Note: If you cannot find a symptom or an error in this list and the problem remains, see 'Undetermined Problems'.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.