Infrared-Related Symptoms (WP z50 - 2608)

Infrared-Related Symptoms
Symptom/Error    FRU/Action in Sequence
   Unable to communicate using 1. Make sure the setup for the IR is correct.
   the Infrared (IR) Port.     Use the WorkPad z50 Configuration utility.
  2. Make sure there are no fluorescent lights near the
      WorkPad z50. The WorkPad z50 may receive optical
      noise from the fluorescent light.
  3. Run the advanced diagnostic test. If an error
      occurs, replace the parts shown by the FRU code.

Note: If you cannot find a symptom or an error in this list and the problem remains, see 'Undetermined Problems'.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.