Operational Dry Cell Battery Checkout (WP z50 - 2608)

Operational Dry Cell Battery Checkout

If the optional Dry Cell Kit (dry cell battery pack) has a problem, refer to the following:

•  AC Adapter Checkout
•  Battery Pack Checkout
•  Checking Operational Charging

1.  Enter suspend mode by pressing the Power button.
2.  Remove the dry cell battery pack and measure the voltage between the battery terminals.
    See the following figure:
    
   

   Pin	Voltage (Vdc)
   1	8.8 - 12.8 V
   7	Ground (-)

    

3.  If the voltage is less than 8.8 Vdc, the dry cell battery pack has been discharged.
    Replace the dry cells.

    If the dry cell battery pack is extremely hot, it must be replaced.