Power Systems Checkout (WP z50 - 2608)
Power Systems Checkout
To determine whether a power systems problem is due to
the AC Adapter or the battery pack, do the following:
- Remove the battery pack.
- Connect the AC Adapter and lock the battery release lock.
Check that power is supplied.
- Disconnect the AC Adapter and install the charged battery pack,
then check that power is supplied by the battery pack.
If you suspect the problem is due to the AC Adapter, go to
'AC Adapter Checkout'.
If you suspect the problem is due to the battery pack, go to
'Battery Pack Checkout'.
External Power/Charge Status LED - indicates the following status:
| LED |
AC Adapter |
Battery Pack |
Charge Status |
| Amber |
Connected |
Li-ion (standard or high-capacity battery) |
Not full |
| Green |
Connected |
Li-ion (standard or high-capacity battery) |
Full |
| Green |
Connected |
Dry cell battery is connected or
no battery is connected |
- |
| Not lit |
Not connected |
- |
- |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.