Keyboard (TP 240 - 2609)


1030 Keyboard



To remove the keyboard:
  1.  Remove the three screws securing the keyboard.
     
  2.  Turn the notebook over, then lift the keyboard as shown.
     
  3.  Remove the keyboard stopper sheet screw.
  4.  Disconnect the keyboard connector from the system board. Remove the keyboard from the lower case.

 

Step Size (Quantity) Head & Color Torque
1 M2.0 x 9 (3) Flat head, black 2.5 kgf-cm
3 M2.5 x 6 (1) Flat head, black 2.5 kgf-cm


Note: Make sure you use the correct screw for replacement.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.