Error Messages
Symptom/Error
FRU/Action in Sequence
Device Address Conflict
1. Load Setup Defaults in BIOS Setup Utility.
2. System board
Allocation Error for: device
1. Load Setup Defaults in BIOS Setup Utility.
2. System board
Failing Bits: nnnn
1. DIMM
2. System board
Invalid System
Configuration Data
System board
I/O device
1. Load Setup Defaults in BIOS Setup Utility.
IRQ conflict
2. System board
Operating system not
1. Enter BIOS Setup Utility and see if the hard disk drive and
found
diskette drive A: are properly identified.
2. Hard disk drive
3. System board
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.