LCD Miscellaneous Parts
(a) M2.5 x 6mm, flat head (2)
(b) M2.5 x 3mm, flat head (1)
M2.5 x 6mm, flat head (2)
NOTE: Make sure you use the correct screw, and tighten all screws firmly to the torque shown in the table, if you have a torque screwdriver. Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.