1110 CPU Mini Cartridge (TP 560Z - 2640)

1110 CPU Mini Cartridge

When removing: In order to avoid damaging the CPU cartridge, do not tilt it for more than 10 mm from the system board.

When re-installing:
  1.  Do not touch the connector pins.
  2.  Do not touch the module.
  3.  Place the CPU mini cartridge on the system board so
     the the screw holes align with posts A, B, C, and D on the system board.
  4.  Press and hold down Area 1 -1-, then, press Area 2 -2-.
  5.  Apply grease (0.2 grams) over the module.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.