1070 LCD Assembly (TP 560Z - 2640)

LCD Assembly

NOTE: For the LCD Assembly removal and replacement, go to '2010 LCD Front Cover'


Step Size (Quantity) Torque
1 M2.5 x 7mm, black plain-head (2) 4kgcm
2 M2.5 x 5mm, yellow bind (2) 4kgcm
3 M2.5 x 2mm, yellow bind (1) 2kgcm

When re-installing: Make sure you use the correct screw, and tighten it firmly to the torque shown in the table if you have a torque screwdriver. Never use a screw that you removed. Use a new one. Make sure the screw is tightened firmly (see 'Screw Tightening Information' if you do not have a torque screwdriver).

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.