1050 Keyboard Bezel (TP 560Z - 2640)

Keyboard Bezel


Step Size (Quantity) Torque
1 M2.5 x 14mm, black bind (1) 3kgcm
2 M2.5 x 10mm, black bind (3) 4kgcm
3 M2.5 x 7mm, black bind (7) 4kgcm

When re-installing: Make sure you use the correct screw, and tighten it firmly to the torque shown in the table if you have a torque screwdriver. Never use a screw that you removed. Use a new one. Make sure the screw is tightened firmly (see 'Screw Tightening Information' if you do not have a torque screwdriver).




You can easily disassemble the LCD release latch. To reassemble it, do as shown:


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.