1040 Hard Disk Drive (TP 560Z - 2640)

Hard Disk Drive

Do not drop or apply any shock.
Do not apply pressure to the cover.
Do not touch the connector.

The hard disk drive is sensitive. Incorrect handling can cause damage and permanent loss of data on the hard disk. Before removing the hard disk drive, make a backup copy of all the data on the hard disk. Never remove the drive while the system is operating, in suspend mode, or in hibernation mode.

NOTE: For 560X, if you are replacing a 4GB hard disk drive, reuse the shield and the tape (P/N 05K4690).


Step Size (Quantity) Torque
1 M3 x 4mm, coin screw (1) 4kgcm

When re-installing: Make sure you use the correct screw, and tighten it firmly to the torque shown in the table if you have a torque screwdriver. Never use a screw that you removed. Use a new one. Make sure the screw is tightened firmly (see 'Screw Tightening Information' if you do not have a torque screwdriver).

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.