DC/DC Card (TP 380XD, 385XD - 2635)

DC/DC Card

Pay attention that the connectors tend to be caught in the base cover.


Step Size (Quantity) Torque
2 M2.5 x 22mm, nylon-coated (2) 3-4 kgcm

NOTE: Make sure you use the correct screw, and tighten all screws firmly to the torque shown in the table, if you have a torque screwdriver. Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly

When installing - The following figure shows the route for the microphone cable:


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.