Upper Shield Case
M2.5 x 8mm, nylon-coated (2)
M2.5 x 6mm, nylon-coated (3)
M2.5 x 6mm, bighead (1)
NOTE: Make sure you use the correct screw, and tighten all screws firmly to the torque shown in the table, if you have a torque screwdriver. Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.