Displaying the Error Log (TP 380-2635/40 - 600-2645)


Displaying the Error Log

Diagnostic errors are printed on a printer attached to the parallel port when the error is detected. The error is also logged in the system memory.

Use the following procedure to display the errors.

  1.  Enter the advanced diagnostic test.
  2.  Press Ctrl+E.
  3.  The error log appears.
  4.  To exit the screen, click on Exit or press Esc.


The error log is not saved when system power is turned off.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.