| Symptom / Error | FRU / Action in Sequence |
|---|---|
| You hear a noise from the | 1. CD-ROM drive |
| CD-ROM drive when the | 2. System board |
| CD-ROM is spinning. | |
| The CD-ROM tray does not | Insert a pin into the CD-ROM emergency |
| open even if you press the | eject hole and eject the CD-ROM tray. |
| CD-ROM eject button. | |
| The compact disc cannot be read | Make sure that: |
| ° The compact disc is not dirty. If it is, | |
| clean it with a CD-ROM cleaner kit. | |
| ° The compact disc is not defective. If it is, | |
| try another compact disc. | |
| ° The compact disc is placed in the tray with | |
| the label side up. | |
| ° The compact disc format confirms with one | |
| of the following: | |
| - Music CD | |
| - CD-ROM or CD-ROM XA | |
| - Multisession photo CD | |
| - Video CD and CD-i movie (Windows 95 does | |
| not support CD-i movie) | |
| --- | |
| 1. CD-ROM drive | |
| 2. System board | |
| The CD-ROM does not work. | Make sure that: |
| ° The computer power is turned on and a | |
| compact disc is in the CD-ROM drive. | |
| ° The CD-ROM drive connector is firmly | |
| connected to the computer. | |
| ° The CD-ROM drive tray is firmly closed. | |
| ° The device drivers are correctly installed. | |
| If the CD-ROM drive in the IBM ThinkPad Dock I | |
| does not work, do the following: | |
| 1. Click on Start | |
| 2. Move the cursor to Programs and | |
| ThinkPad, then click on ThinkPad | |
| Configuration | |
| 3. Click on Docking Station | |
| 4. Make sure that you checked Enable IDE | |
| device in the docking station. | |
| NOTE: Do not use IRQ 11 and 15 | |
| for the PCI device setting. | |
| 5. Click on OK | |
| --- | |
| 1. CD-ROM drive | |
| 2. System board |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.