1090 LCD Unit (TP-770

1090 LCD Unit (TP-770 - 9548/49)

LCD Unit

Pull the straps to disconnect the connectors.
If the connectors do not disconnect, use a screwdriver.

NOTE: When replacing the LCD unit, do not place the hinge between the lower shield and the Base Cover.

Step Size (Quantity) Color Torque 3 M2.5 x 4 mm , Nylon (1) Yellow 4 kgcm

Step	Size (Quantity)	Color	Torque
3	M2.5 x 4 mm , Nylon (1)	Yellow	4 kgcm

Step Size (Quantity) Color Torque 4 M2.5 x 6 mm , Nylon (4) Black 4 kgcm

Step	Size (Quantity)	Color	Torque
4	M2.5 x 6 mm , Nylon (4)	Black	4 kgcm

NOTE: Make sure you use the correct screw and tighten the screw to the torque specified. Do not use the screw that you have removed, use a new screw.

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.