Displaying the Error Log



Displaying the Error Log

Diagnostic errors are printed by a printer that is attached to the parallel port when the error is detected.
The error is also logged in the system memory.

Use the following procedure to display the errors:
  1.  Enter the advanced diagnostic test.
  2.  Press Ctrl+E.
  3.  The error log appears.
  4.  To exit the screen, click on Exit or press Esc


NOTE: The error log is not saved when the system is powered-off.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.