Infrared-Related Symptoms (TP-770 - 9548/49)



Infrared-Related Symptoms
Symptom / Error    FRU / Action in Sequence
   Unable to communicate using 1. Make sure the setup for the IR is correct.
   the Infrared (IR) Port. 2. Make sure there are no fluorescent light near the
      computer. The computer may receive optical noise from
      the flurescent light.
  3. Run the advanced diagnostic test (see 'Running the Diagnostics'.
      If an error occurs and a FRU code is displayed replace the
      parts shown by the FRU code.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.