| Symptom / Error |
FRU / Action in Sequence |
| You hear a noise from the |
1. DVD drive |
| DVD drive when the DVD |
2. System board |
| disk or compact disk is spinning. |
|
| The DVD tray does not |
Insert a pin into the DVD emergency |
| open even if you press the |
eject hole and eject the DVD tray. |
| DVD eject button. |
|
| The DVD disc or compact disk |
Make sure that: |
| cannot be read |
° The DVD disc or compact disc is not dirty. If it is, |
| |
clean it with a CD-ROM cleaner kit. |
| |
° The DVD disc or compact disc is not defective. If it is, |
| |
try another DVD disc. |
| |
° The DVD disc is placed in the tray with |
| |
the label side up. |
| |
° The DVD disc format confirms with one |
| |
of the following: |
| |
- Music CD |
| |
- CD-ROM or CD-ROM XA |
| |
- Multisession photo CD |
| |
- Video CD and CD-i movie (Windows 95 does |
| |
not support CD-i movie) |
| |
- DVD-ROM (DVD-video) |
| |
- DVD-movie with MPEG hardware and software |
| |
--- |
| |
1. DVD drive |
| |
2. System board |
| The DVD does not work. |
Make sure that: |
| |
° The computer power is turned on and a |
| |
DVD disc or compact disc is in the DVD drive. |
| |
° The DVD drive connector is firmly |
| |
connected to the computer. |
| |
° The DVD drive tray is firmly closed. |
| |
° The device drivers are correctly installed. |
| |
° If the DVD drive in the IBM ThinkPad Dock I |
| |
does not work, do the following: |
| |
1. Click on Start |
| |
2. Move the cursor to Programs and |
| |
ThinkPad, then click on ThinkPad |
| |
Configuration |
| |
3. Click on Docking Station |
| |
4. Make sure that you checked Enable IDE |
| |
device in the docking station. |
| |
NOTE: Do not use IRQ 11 and 15 |
| |
for the PCI device setting. |
| |
5. Click on OK |
| |
--- |
| |
1. DVD drive |
| |
2. System board |