| Beep Symptoms | |
|---|---|
| Symptom / Error | FRU / Action in Sequence |
| Insert system diskette and press | 1. Ensure the 'System boot drive' in the System Security |
| <Enter> key to reboot | of BIOS Utility is not set to [Drive A]. |
| 2. Ensure the diskette drive configuration setting in | |
| BIOS Utility is correct. | |
| 3. Diskette drive | |
| 4. Hard disk connector board | |
| 5. Hard disk drive | |
| 6. System board | |
| No Beep Symptoms | |
| Symptom / Error | FRU / Action in Sequence |
| No beep, power-on indicator | 1. Ensure all connectors are securely seated |
| on, and a blank LCD not POST | 2. Reseat the CPU |
| 3. CPU | |
| 4. System board | |
| No beep, power-on indicator | 1. Reseat the LCD Connectors |
| not on, and a blank LCD | 2. Power source (battery & adapter). See |
| during POST | 'Power Systems Checkout' |
| 3. Audio connector board | |
| 4. Charger board | |
| 5. Hard disk drive | |
| 6. LCD inverter ID | |
| 7. LCD FPC cable | |
| 8. LCD inverter | |
| 9. LCD | |
| 10. System board | |
| No beep, power-on indicator | 1. Reseat the DIMM |
| on, and a blank LCD | 2. Reseat the LCD connectors |
| during POST | 3. Hard disk/CD-ROM/diskette drive connectors |
| 4. Hard disk drive | |
| 5. Keyboard | |
| 6. LCD inverter ID | |
| 7. LCD FPC cable | |
| 8. LCD inverter | |
| 9. LCD | |
| 10. System board | |
| No beep, power-on indicator | 1. Reseat the LCD Connectors |
| on, and a blinking cursor | 2. Reseat Hard disk/CD-ROM/diskette drive connectors |
| only during POST | 3. Hard disk drive |
| 4. LCD inverter ID | |
| 5. LCD FPC cable | |
| 6. LCD inverter | |
| 7. LCD | |
| 8. System board | |
| No beep during POST but | System board |
| system runs correctly | NOTE: The buzzer/speaker is on the system board. |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.