|Symptom / Error||FRU / Action in Sequence|
|External display does||1. See 'External Display Self-Test' in|
|not work correctly.||Common Devices Checkout section|
|Printer problems.||1. Run Printer Self-test.|
|2. Parallel Port Device|
|4. System Board|
|Serial or parallel port device problems.||1. Device|
|2. Device Cable|
|3. System Board|
|External diskette drive does||1. Reseat the external FDD connector|
|not work correctly, or||NOTE: When reseating the external FDD connector,|
|internal diskette drive is not||a. Remove the connector|
|recognized.||b. Insert the flexible cable straight until the|
|white line aligns with the edge of the connector.|
|c. Replace the screws of the connector.|
|Be careful not to damage the edge of the flexible|
|cable when inserting it into the connector|
2. External diskette drive
3. Make sure that the diskette is not damaged.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.