Removing a Hard Disk Password



Removing a Hard Disk Password

The procedure to remove a hard disk password depends on whether it is set the same as the power-on password.

When the hard disk password is set the same as the power-on password:
  1.  Remove the password by following the steps in Removing a Power-On Password  in the users guide.
     This operation removes both the hard disk password and the power-on password.
  2.  If you need a power-on password, set it in Easy-Setup.


When the hard disk password and the power-on password are different,
or apower-on password has not been set:

  1.  Turn off the computer and wait at least 5 seconds, then turn it on.
  2.  If you have set the power-on password, type it, then press Enter
  3.  When the hard disk password prompt appears, type the current hard disk password, then press Spacebar
  4.  Press Enter


All the steps can be summarized as follows:

Current  (space)(Enter)


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.