| Symptom / Error | FRU / Action in Sequence |
|---|---|
| Unable to communicate using | 1. Make sure the setup for the IR is correct. |
| the Infrared (IR) Port. | 2. Make sure there are no fluorescent lights near |
| the computer. The computer may receive optical | |
| noise from the fluorescent light. | |
| 3. Reseat the IR unit. | |
| 4. Run the advanced diagnostic test. If an error occurs | |
| and a FRU code is displayed, replace the parts | |
| shown by the FRU code. |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.