| Symptom / Error | FRU / Action in Sequence |
|---|---|
| No beep, power-on indicator not on, | 1. Go to 'Power Systems Checkout'. |
| and a blank LCD during POST. | 2. System board |
| 3. DC/DC card | |
| 4. Power sources | |
| No beep, power-on indicator on, | 1. System board |
| and a blank LCD during POST. | 2. DC/DC card |
| 3. CPU card | |
| No beep, power-on indicator on, | 1. System board |
| and a blinking cursor only during POST. | 2. CPU card |
| 3. DC/DC card | |
| No beep during POST but | 1. Turn the volume up and check the speaker. |
| system runs correctly. | 2. Check whether the DSP card or Audio (ESS) card |
| connector is loose | |
| and reseat the connector. | |
| 3. Speaker | |
| 4. DSP card/audio (ESS) card | |
| 5. DC/DC card |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.