FRU Codes (9546, 9547)



FRU Codes

If an error is detected by the diagnostic tests, a four-digit  FRU code is displayed. The FRU code indicates two suspected FRUs. Replace the FRU that is indicated by the two leftmost digits  first, then replace the FRU indicated by the two rightmost digits .
No FRU is assigned to code 00.
If only one FRU is suspected, the other FRU code is filled with zeros. See the page referred to before replacing the FRU.
FRU Code    FRU/Action
   10    System board
   
   11    CPU card
   
   15    Audio card (ESS)
   
   16    DSP card
   
   17    Front IR unit
   
   18    Rear IR unit
   
   20    Memory
     (See 'Memory Checkout'.)
   
   30    Reserved
   
   32    External keyboard
   
   33    External mouse
   
   40    LCD assembly
   
   42    Video card
   
   45    External CRT
   
   50 1. Reseat the drive (FDD-1)
  2. Diskette drive (FDD-1)
   
   51 1. Reseat the diskette drive (FDD-2)
  2. Diskette drive (FDD-2)
   
   60 1. Reseat the hard disk drive (HDD-1)
  2. Hard disk drive (HDD-1)
   
   61 1. Reseat the hard disk drive (HDD-3)
  2. Hard disk drive (HDD-3)
   
   62 1. Reseat the hard disk drive in the UltraBay (HDD-2)
  2. Hard disk drive in the UltraBay (HDD-2)
   
   63 1. Reseat the hard disk drive (HDD-4)
  2. Hard disk drive (HDD-4)
   
   70    PCMCIA-2 (replicator)
   
   71    PCMCIA (under UltraBay)
   
   72    PCMCIA slot assembly
   
   90    CD-ROM drive
   
   91    External CD-ROM drive


NOTE: The device ID and error codes are used to indicate the detail portion of the FRU which caused the error. If replacing a FRU does not correct a problem, see the device ID or error code from the previous failure. If they have changed, the cause might be because the new FRU is defective or that the FRU was incorrectly installed.

If the problem remains after replacement of the FRUs, go to 'Undetermined Problems'.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.