How to Disable the Power-On Password (2625 365X, XD)

1.  Power off the computer.
2.  Open the keyboard and lift the right-most section of the insulator  sheet.
3.  Push out the small door on the right side of the base cover.  See 'Power-On Password Jumper Pads' for location.
4.  Apply a short across the Power-On Password Jumper Pads.

       When using a metal tool to short the two jumper pads, make sure the  metal tool does not touch any metal part other than the two jumper pads.

5.  With the jumper tool in place, power on the computer to clear the  password.
6.  Remove the jumper and power off the computer.
7.  Power on the computer and verify that the password has been cleared.