2040 LCD Cable / Hinges (2640-560x - 60x, 70x)

LCD Cable / Hinges

•  DIMM Card (if installed)
•  Battery Pack
•  Frame
•  Keyboard Unit
•  LCD Assembly
•  LCD Front Cover
•  LCD Panel
•  Inverter Card (DSTN only)

DSTN or TFT 1

•   1 2 :LCD cable
•   3 4 :Hinges

 +----+----+-------+
 |Step|Qty |Torque |  Screw No.
 +----+----+-------+

   1    2    3kgcm   
 -------------------

   3    3    3kgcm   

NOTE: Make sure you use the correct screw, and tighten it firmly to the torque shown in the table if you have a torque screwdriver.
Never use a screw that you removed. Use a new one. Make sure the screw is tightened firmly.
(see Screw Tightening Information if you do not have a torque screwdriver.)

When replacing:
See the following figure:

•   1 2 :LCD cable
•   3 4 :Hinges

 +----+----+-------+
 |Step|Qty |Torque |  Screw No.
 +----+----+-------+

   1    2    3kgcm   
 -------------------

   3    3    3kgcm   

NOTE: Make sure you use the correct screw, and tighten it firmly to the torque shown in the table if you have a torque screwdriver.
Never use a screw that you removed. Use a new one. Make sure the screw is tightened firmly.
(see Screw Tightening Information if you do not have a torque screwdriver.)

When replacing:
See the following figure.