Checkout Guide
Use the following procedure as a guide for computer problems.
NOTE: The diagnostic tests are intended to test only
IBM products.
NOTE: To run the diagnostics, refer to 'Running the Diagnostics'
Symptom
Go to
Power failure.
(The power indicator does not go on
or stay on.)'Power Systems Checkout'
POST does not complete.
No beeps/error code are indicated.'Symptom-to-FRU Index'
and then use the
'No Beep Symptoms' table.
POST beeps, but no error codes are
are displayed.'Symptom-to-FRU Index'
and then use
the 'Beep Symptoms' table.
POST detected an error and
displayed numeric error codes.'Symptom-to-FRU Index'
and then use the
'Numeric Error Codes' table.
The diagnostic test detected an
error and displayed an FRU code.'Running the Diagnostics'
The configuration is not the same
as the installed devices.'Checking the Installed Devices List'
Other symptoms
(such as LCD display problems).'Symptom-to-FRU Index',
and then use
the 'Other Symptoms' table.
Symptoms cannot be recreated.
(Intermittent problems.)Use the customer reported symptoms
and go to 'Symptom-to-FRU Index'