FRU Codes (SelectaDock II - III)



FRU Codes

If an error is detected by the diagnostic tests, a four-digit FRU code is displayed.
 
The FRU code indicates two suspected FRUs. Replace the FRU that is indicated by the two leftmost digits first, then replace the FRU that is indicated by the two rightmost digits.
No FRU is assigned to code 00.
If only one FRU is suspected, the other FRU code is filled with zeros.

See the reference page before replacing the FRU.

FRU Code FRU
10 1. System board
15 1. Audio card
2. Riser Card
30 Reserved
32 1. External keyboard
2. Main card
3. Riser card
33 1. External mouse
2. Main card
3. Riser card
45 External monitor
51 1. Reseat the diskette drive (FDD-2)
2. Diskette drive (FDD-2)
3. Main card
4. Riser card
56 1. Diskette drive (FDD-2)
2. Main card
3. Riser card
61 1. Reseat the hard disk drive in the SelectaDock
Docking System (HDD-3)
2. Hard disk drive in the SelectaDock Docking System (HDD-3)
3. Main card
63 1. Reseat the second hard disk drive in the
SelectaDock Docking System (HDD-4)
2. Second hard disk drive in the SelectaDock
Docking System (HDD-4)
3. Main Card
70 1. PCMCIA-2 (port replicator)
2. Main card
73 Port replicator
74 Main card
75 USB card
80 Reserved
90 CD-ROM drive
91 CD-ROM drive in the SelectaDock
92 DVD drive
93 DVD drive in the SelectaDock


If the problem still remains after replacement of the FRUs, go to Undetermined Problems.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.