Symptom/Error | FRU/Action |
---|---|
Computer does not | 1. Pen |
respond to Pen input. | 2. LCD Assembly |
3. System Board | |
LCD backlight not | 1. Inverter Card |
functioning | 2. LCD Assembly |
3. System Board | |
LCD backlight intensity | 1. Inverter Card |
not adjustable | 2. LCD Assembly |
3. System Board | |
LCD contrast not | 1. LCD Assembly |
adjustable | 2. System Board |
System hang or | 1. Press 'Reset Button' |
intermittent hang | 2. System Board |
(See | 3. Operating System |
'Undetermined Problems' | |
before replacing any FRUs | |
The system does not | 1. System Board |
suspend or resume | 2. LCD Assembly |
The system does not | 1. Press 'Reset Button' |
power off | 2. System Board |
Real-time clock inaccurate | 1. System Board |
Printer problems | 1. System Board |
(See | 2. Parallel Port Device Cable |
'Printer Checkout') | |
Serial or parallel port | 1. Device |
device problems | 2. Device Cable |
3. System Board | |
LED incorrectly remains | 1. System Board |
off, but system runs OK | |
Modem Card does not | 1. Verify that the setup |
communicate with a | data defined by the |
modem or FAX. | communication software |
is suitable for the | |
communication | |
2. Modem Card |
If the problem remains, see 'Undetermined Problems'