| Symptom/Error | FRU/Action |
|---|---|
| Continuous beep | 1. System Board |
| One beep and blank, | 1. LCD Assembly |
| unreadable, or flashing | 2. System Board |
| LCD | 3. Memory Card |
| 4. IC DRAM Card | |
| One beep and the message | 1. TPF |
| 'Boot source cannot be | 2. System Board |
| found' | |
| One beep and the message | 1. TPF |
| 'Unable to access boot | 2. System Board |
| source' | |
| One long, two short beeps | 1. System Board |
| and a blank or unreadable | 2. LCD Assembly |
| LCD | |
| Five very short beeps | 1. Connect an AC adapter |
| or install a fully charged | |
| battery. | |
| Ten very short beeps | 1. Connect an AC adapter |
| or install a fully charged | |
| battery (allow system to | |
| complete shutdown | |
| before changing the battery). | |
| System is shutting down due | |
| to low battery voltage. | |
| Two short beeps | 1. POST error. Refer to |
| 'Numeric Error Codes' list |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.